Simplify your energy and floorspace requirements with the new compact robot from FANUC Robotics. The R-1000iA/100F high speed robot makes it possible for companies to condense workcell space and ultimately utilize resources more efficiently.
The R-1000iA/100F robot's 100kg payload capacity is well suited for a variety of applications from spot welding and material handling to machine tending. An IP67 rated wrist gives the robot protection from wet environments.
Streamlined Design Changes Everything:
Compared to other spot welding and material handling robots, the R-1000iA/100F has a slim build. This allows the robot to move much faster (saving energy) and require less workcell space. Whether you're looking to conserve space by placing more robots in a single workcell, or install robots in closer proximity to positioners and other peripherals, this robot is the answer. It can be installed on the floor or inverted and mounted from the ceiling.
Conserving with Internal Safety Features:
FANUC Robotics has incorporated a number of safety features into the robot itself. This saves floor space and simplifies installation, programming and use. Dual Check Safety (DCS) and Position Check are internal safeguards that confine the robot to a specific work space. Previously, a more complex arrangement of external safety peripherals was necessary to keep the robot in check. These external peripherals required more space and monitoring.
For more information about the R-1000iA/100F and other Fanuc spot welding and material handling solutions, contact RobotWorx at 740-251-4312. The FANUC R-1000iA/100F robot will be available for purchase in 2011.
