Fanuc M-710iC/T

The Fanuc M‑710iC robot is the lat­est gen­er­a­tion, medi­um pay­load mem­ber of the Toploader fam­i­ly. This series fea­tures two mod­el options (50kg and 70kg) that are six-axes, mod­u­lar con­struc­tion, and elec­tric ser­vo-dri­ven artic­u­lat­ed gantry robot designs. The M‑710iC/​T series are engi­neered for fast speeds, reli­a­bil­i­ty, pre­ci­sion, and user-friend­ly set­up as they can set up mul­ti­ple ver­ti­cal and/​or hor­i­zon­tal machines. The robots in this series can improve machine pro­duc­tiv­i­ty by 30%!

This series of robots exceeds at medi­um-heavy mate­r­i­al han­dling and machine tend­ing, but can also per­form post-pro­cess­ing oper­a­tions. The Fanuc M‑710iC/​50T can car­ry a pay­load up to 50kg and the Fanuc M‑710iC/​70T up to 70kg.

The Fanuc M‑710iC/​T com­bines the advan­tages of a lin­ear gantry with the ver­sa­til­i­ty of a Fanuc robot arm. The M710iC/​T robot­ic gantry sys­tem has a large, scale-able work enve­lope while main­tain­ing min­i­mal floor­space require­ments. Both M 710iC/​T mod­els are avail­able with stan­dard rail lengths of 7.2 to 46.2 m, but can also be cus­tom-ordered with any size rails to adapt very eas­i­ly to exist­ing plant layouts.

The M710iC/​T can use either the R‑30iA, R‑30iA, or the RJ3iC con­troller and is sure to add val­ue to your pro­duc­tion line.

If you are look­ing to save even more costs, then con­sid­er a used M‑710iC/​T. Robots​.com rep­re­sen­ta­tives work hard on refur­bished M710iC/​T robots, bring them back to mint condition.