Aerospace and Solar Power in Arizona

With all the open air and sun that is avail­able in Ari­zona, it isn’t sur­pris­ing that com­pa­nies in the solar ener­gy and aero­space indus­tries would take up shop there. There are sev­er­al ground break­ing indus­tries like this in Ari­zona, and through the use of indus­tri­al robot­ics, these tech­nolo­gies can also remain com­pet­i­tive in their mar­kets and get more prod­ucts out to con­sumers at a faster rate.

Gestamp Solar Steel is com­pa­ny from Spain that took up res­i­dence in Sur­prise, Ari­zona in 2011. The com­pa­ny man­u­fac­tures parts used in the solar ener­gy indus­try. These parts need to be cut and assem­bled, and that can be done more effi­cient­ly with the help of indus­tri­al robots. By using robots to cut solar pan­els, man­u­fac­tur­ers like Gestamp Solar Steel are all but elim­i­nat­ing the pos­si­bil­i­ty for work­er error. If pan­els are cut more effi­cient­ly, then there will be less mis­takes and less dam­age and waste dur­ing the pro­duc­tion process, which also makes the use of robot­ics an envi­ron­men­tal­ly-friend­ly option.

When you’re talk­ing the aero­space indus­try, you couldn’t get very far with­out talk­ing about Tri­umph Engines. This Tempe, AZ based com­pa­ny man­u­fac­tures, designs and over­hauls after­mar­ket aero­space com­po­nents. They offer process­es like elec­tron beam weld­ing, ther­mal spray­ing and milling. These are just some of the appli­ca­tions that are bet­ter oper­at­ed by robot­ics. By using robot­ics for these process­es, welds will be stronger, spray­ing will be more even and milling will be more accu­rate. Over­all, robot­ic tech­nol­o­gy helps cre­ate a bet­ter product.

Com­pa­nies in Ari­zona need to look east to Robots​.com. From robot sys­tems to work­cells to parts, we have it all.

For more infor­ma­tion about inte­grat­ing your pro­duc­tion, con­tact Robots​.com today online or at 877−762−6881.