Fanuc ARC Mate 120iC

The Fanuc ARC Mate 120iC is a high-speed arc weld­ing and cut­ting, six-axis indus­tri­al robot. Longer reach and pay­load than its pre­de­ces­sors increase the work enve­lope and pay­load capac­i­ty make the Fanuc Arc Mate 120iC an ide­al weld­ing robot for any auto­mat­ed man­u­fac­tur­ing floor.

Because of its sim­ple and reli­able build, the Fanuc 120iC weld­ing robot pro­vides accu­rate and con­sis­tent path per­for­mance. Even with the increase in pay­load, the ARC Mate 120iC build remains slim and com­pact. The ARC Mate 120iC arm is con­struct­ed for strength and rigid­i­ty, with a hol­low wrist and inter­nal­ly rout­ed cabling to pro­vide bet­ter part acces­si­bil­i­ty and min­i­mize haz­ards. The process spe­cif­ic design of the ARC­Mate 120iC R‑30iA / R‑30iB was made to pro­tect the weld torch cable from the wire feed­er to the torch goose neck, allow­ing pro­grams to be test­ed with­out com­pen­sat­ing the torch cable.

The ARC Mate 120iC Fanuc robot can be con­trolled by a wide range of con­trollers such as the R‑30iA, the R‑30iB, the R‑30iB Mate Cab­i­net, the R‑30iB A‑Cabinet, the R‑30iB B‑Cabinet, or the R‑30iB iPen­dant touch. It also has a built-in col­li­sion detec­tion sys­tem keeps it from run­ning into exter­nal objects, endan­ger­ing them­selves or oth­er equipment.

If you are look­ing to get the same ben­e­fits of the ARC Mate 120iC but at low­er costs, then con­sid­er a used Fanuc ARC Mate 120iC by Robots​.com. Robots​.com rep­re­sen­ta­tives work hard by putting all of their recon­di­tioned robots through an intense refur­bish­ment process.