Fanuc ARC Mate 120iC
Request a Quote
The Fanuc ARC Mate 120iC is a high-speed arc welding and cutting, six-axis industrial robot. Longer reach and payload than its predecessors increase the work envelope and payload capacity make the Fanuc Arc Mate 120iC an ideal welding robot for any automated manufacturing floor.
Because of its simple and reliable build, the Fanuc 120iC welding robot provides accurate and consistent path performance. Even with the increase in payload, the ARC Mate 120iC build remains slim and compact. The ARC Mate 120iC arm is constructed for strength and rigidity, with a hollow wrist and internally routed cabling to provide better part accessibility and minimize hazards. The process specific design of the ARCMate 120iC R‑30iA / R‑30iB was made to protect the weld torch cable from the wire feeder to the torch goose neck, allowing programs to be tested without compensating the torch cable.
The ARC Mate 120iC Fanuc robot can be controlled by a wide range of controllers such as the R‑30iA, the R‑30iB, the R‑30iB Mate Cabinet, the R‑30iB A‑Cabinet, the R‑30iB B‑Cabinet, or the R‑30iB iPendant touch. It also has a built-in collision detection system keeps it from running into external objects, endangering themselves or other equipment.
If you are looking to get the same benefits of the ARC Mate 120iC but at lower costs, then consider a used Fanuc ARC Mate 120iC by Robots.com. Robots.com representatives work hard by putting all of their reconditioned robots through an intense refurbishment process.
Let's talk!
Can’t find what you are looking for?
Call specialist on +18777626881 or write a message.
- [email protected]
- Phone
- 877-762-6881
- Office
-
1216 Heil Quaker Blvd
La Vergne, TN 37086
- Socials