The high-speed EPH130RLD robot is perfectly suited for the rigors of press handling and offers numerous reasons to purchase. To begin, you can expect nothing short of maximum performance and durability with any of the robots from the Expert Press Handling series. This model in particular is shelf-mounted and offers a 3,474 mm horizontal reach; 4,151 mm vertical; and ±0.3 mm repeatability. These specs allow improved clearance for die changes and give enough spacing (from 4-7 m) when used for press tending. In addition, there is a high vibration rating making it ideal for the press room. 

Another advantage of the design of the EPH130RLD is that it is energy efficient with a 25% reduction of power consumption. For high duty cycle applications, the EPH130RLD has higher-performance drive systems on the S-, L-, and U-axes.Also, the multiple robot control simplifies programming as it can coordinate with up to 8 robots/72 axes. 

The DX100 programming pendant is small and lightweight. To further increase needed flexibility, the EPH 130RLD can be used in a dual-robot, two-controller configuration with other DX100 controlled robots. 

For more information about the Motoman EPH130RLD, contact a RobotWorx representative today at 740-251-4312.
For more information about the Motoman EPH130RLD, contact a RobotWorx representative today at 740-251-4312.

Robot Information

Robot Specifications

Axes: 6
Payload: 130.00kg
H-Reach: 3474.00mm
Repeatability: ±0.3000mm
Robot Mass: 1445.00kg
Structure: Articulated
Mounting: Floor

Robot Motion Speed

J1 110 °/s (1.92 rad/s)
J2 110 °/s (1.92 rad/s)
J3 110 °/s (1.92 rad/s)
J4 215 °/s (3.75 rad/s)
J5 180 °/s (3.14 rad/s)
J6 300 °/s (5.24 rad/s)

Robot Motion Range

J1 ±180°
J2 +70° - 130°
J3 +95° - 70°
J4 ±360°
J5 ±130°
J6 ±360°
Get our newsletter | Stay on top of the latest news