AutoDrive® SA One-Pak® for ABB 1520iD

Request a Quote

1/4

Description

Part # K4678-1520ID

When it comes to weld­ing alu­minum parts robot­i­cal­ly, arc starts and con­sis­tent wire feed­ing are cru­cial. Auto­Drive® SA is a high-per­for­mance alu­minum ser­vo torch solu­tion engi­neered to address the com­mon prob­lems with robot­ic alu­minum weld­ing – all to make the weld­ing process eas­i­er and has­sle-free. The sys­tem inte­grates with a robot and com­mu­ni­cates direct­ly with a Lin­coln Elec­tric® Pow­er Wave® result­ing in a best-in-class Alu­minum solution.

A Clean Start

Auto­Drive SA uses touch-retract start tech­nol­o­gy to ini­ti­ate each robot­ic weld with no spat­ter or burn­back. This ensures a con­sis­tent arc start from start to finish.

It’s All About the Weld

The Auto­Drive SA allows the Pow­er Wave to have pre­cise con­trol over the wire feed speed. The coor­di­na­tion of the wire feed speed, paired with Pow­er Wave Wave­form Con­trol Tech­nol­o­gy®, results in an alu­minum weld that only Lin­coln Elec­tric can deliver.

Longer Life, Improved Productivity

Auto­Drive SA uses Mag­num® PRO Cop­per Plus™ con­tact tips. The sys­tem goes the dis­tance by deliv­er­ing more than 250,000 starts and stops with a sin­gle con­tact tip. This rep­re­sents a decrease in change overs, a reduc­tion in down­time and a sig­nif­i­cant increase in productivity.

Fea­tures

  • Con­sis­tent wire feed­ing for robot­ic alu­minum welding.
  • Touch-retract start tech­nol­o­gy to ini­ti­ate each robot­ic weld with no spat­ter or burnback.
  • Con­sis­tent arc start from start to finish.
  • Deliv­ers more than 250,000 starts and stops with a sin­gle con­tact tip.
  • Decrease change over time.

What’s Includ­ed

  • Push Feed­er 
  • Pull Feed­er Mount­ing Bracket 
  • Feed­er Insulator 
  • Con­trol Cable 
  • Feed­er Cable Bundle 
  • Break­away Disk Torch 
  • Tube Torch Conduit 
  • Torch Lin­er 
  • Alu­minum Con­tact Tips

Auto­Drive SA Prod­uct Info

Request a Quote