Motoman MS80W

There is no deny­ing the huge ben­e­fits and rea­sons to add the ​“mas­ter spot” welder MS80W into your automa­tion line. To begin with, it has an 80 kg pay­load, reduced cycle times, and boasts speeds 43% faster than oth­er large pay­load robots. The MS80W also has a small foot­print and is very com­pact, both which make it ide­al for high-den­si­ty lay­outs. Also, there is flex­i­bil­i­ty with the design of the off­set low­er arm which enables the MS80W to be able to be shelf mount­ed, if necessary. 

Add a MS80W into your facil­i­ty, and instant­ly see a 50% com­bined pow­er sav­ings when com­pared with tra­di­tion­al robots because it can be used with the lighter, more effi­cient, DC gun. These guns are avail­able in X- or C- con­fig­u­ra­tions with 600 kg clamp­ing force. 

There are two vari­ants avail­able of the MS80W to help per­fect­ly meet your spe­cif­ic needs. 

The MS80W (SW) is the spot weld­ing option that is up to 43% faster than com­pet­ing heavy-pay­load robots. The MS80W (MH) is a mul­ti­pur­pose ver­sion that pro­vides a wide range of appli­ca­tions with pow­er and high-speeds, such as dis­pens­ing, machine tend­ing, mate­r­i­al cut­ting, mate­r­i­al han­dling, and press tending. 

The DX100 Con­troller is paired with all vari­ants of the MS80W and it can sup­port up to 8 robots/​72 axes.