Motoman MA2010

Request a Quote

Payload
Payload
10 kg
Reach
Reach
2010 mm
Axes
Axes
6

The Motoman MA2010 is an advanced 6‑axis arc weld­ing robot. This robot comes equipped with the new DX200 con­troller, 10 kg pay­load, and a +/-0.8 mm repeata­bil­i­ty. The MA2010 is slim with an extend­ed reach, allow­ing it to increase pro­duc­tion with­out tak­ing up much space. It has a wide 50 mm through-hole for torch cabling, sen­sor wires, and water cool­ing that elim­i­nates cable inter­fer­ence and sim­pli­fies pro­gram­ming. Its sym­met­ric wrist design allows for equal torch access to both sides of the part being weld­ed. The Motoman MA2010 is ide­al­ly suit­ed for high-den­si­ty work­cells with mul­ti­ple robots work­ing in close prox­im­i­ty, due to its slim­ness and accu­ra­cy, but it works great by itself as well. 

If you are look­ing for high speed, accu­rate arc weld­ing automa­tion, the Motoman MA2010 is just what you need.

Payload
10 kg
Reach
2010 mm
Axes
6
Repeatability
0.08 mm
Mass
280 kg
Structure
Articulated
Mounting
Floor

J1
197 °/s (3.44 rad/s)
J2
190 °/s (3.32 rad/s)
J3
210 °/s (3.67 rad/s)
J4
410 °/s (7.16 rad/s)
J5
410 °/s (7.16 rad/s)
J6
610 °/s (10.65 rad/s)

J1
±180°
J2
+155° - 105°
J3
+220° - 170°
J4
±150°
J5
+90° - 135°
J6
±210°

Let's talk!

Can’t find what you are looking for?
Call specialist on +18777626881 or write a message.

Office
1216 Heil Quaker Blvd
La Vergne, TN 37086
Socials
LinkedIn