The Fanuc ArcMate 100iC/12S Robot

One of the best things about a new robot is not only the advan­tages the robot itself can bring to the table, but also all of the fea­tures that can be added to it to make it work even bet­ter. That is the case with the Fanuc ARC Mate 100iC/​12S robot. This arc weld­ing robot has all of the advan­tages of the ARC Mate series, while also being able to use fea­tures to fur­ther improve the arc weld­ing process.

Like many oth­er mem­bers of the ARC Mate series, the ARC Mate 100iC/12S does not dis­ap­point when it comes to speed and accu­ra­cy, run­ning cir­cles around any man­u­al appli­ca­tion that came before it. How­ev­er, that accu­ra­cy and speed can fur­ther improve when the 100iC-12S is paired with iRVi­sion tech­nol­o­gy from Fanuc. This sys­tem of cam­eras allows the robot to track seams, see the prod­uct it is weld­ing, and even per­form qual­i­ty con­trol on its own work, which enhances the qual­i­ty of the prod­uct even more.

Anoth­er great fea­ture for the Fanuc 100iC/​12S are the sen­sors that allow it to not only coor­di­nate motion, but increase the safe­ty of the robot with col­li­sion detec­tion. Coor­di­nat­ed motion allows the robots to work togeth­er in a tight space, some­times weld­ing on the same part at the same time. Col­li­sion detec­tion allows the 100 iC/​12S to slow or come to a com­plete stop if it sens­es some­thing in its path. This could be a life­sav­ing fea­ture for some­one who steps too close to the robot while it is operating.

All in all, the fea­tures, along with the advan­tages of the ARC Mate series, are what make the Fanuc ARC Mate 100iC/​12S a great weld­ing robot.

Are you inter­est­ed in learn­ing more about the Fanuc ARC Mate series? If so, then you should call Robots​.com, a cer­ti­fied inte­gra­tor for Fanuc Robot­ics. Our staff will work with you to help you build and cus­tomize your Fanuc sys­tem with all of the best parts and features.

For more infor­ma­tion, con­tact Robots​.com today online or at 877−762−6881.