Fanuc M Series Robots In Stock for Quick Shipment

With a design that is based on its sib­ling, the M‑900iB/​360, the Fanuc M‑900iB/​280 is a rigid, pre­cise robot. Fanuc went back to the draw­ing board with this mod­el, giv­ing the J3 arm more stiff­ness, which allows this mod­el to be the ulti­mate M‑900iB for pre­ci­sion. While the M900iB/​280 is suit­ed for a vari­ety of dif­fer­ent mate­r­i­al han­dling appli­ca­tions, it shines when used for mate­r­i­al removal process­es, like rout­ing, cut­ting, debur­ring, and drilling, where the tool­ing requires pres­sure and accu­ra­cy is an absolute must.

The Fanuc M‑710iC/​45M robot is a medi­um pay­load robot capa­ble of han­dling up to 45kg. This advanced M710iC/45M robot can per­form appli­ca­tions rang­ing from assem­bly, pack­ag­ing, to arc weld­ing. The Fanuc M 710iC/​45M robot has a 2606mm reach and +/-0.1mm repeata­bil­i­ty. If you are look­ing for a ver­sa­tile robot to han­dle medi­um pay­loads, the Fanuc M‑710iC 45M robot is just what you need.

The Fanuc M‑20iA/​35M is ide­al for a vari­ety of appli­ca­tions rang­ing from mate­r­i­al han­dling to assem­bly. With the abil­i­ty to han­dle 35kg, this M20iA robot can offer more strength. The M20iA/​35M has a 1811 reach and 0.08mm repeata­bil­i­ty. The M‑20iA/​35M is able to decrease down-time caused by dress out as it has a hol­low upper arm and wrist that neat­ly con­tains the cables. This elim­i­nates any snag­ging, tear­ing, or rub­bing and makes it per­fect for offline programming.

The Fanuc M‑20iA robot is designed to help man­u­fac­tur­ers avoid cost­ly down­time and engi­neer­ing headaches. The M‑20iA has a hol­low upper arm and wrist and a unique design that enables util­i­ties to be neat­ly con­tained with­in the arm, help­ing to avoid snag­ging, tear­ing, or rub­bing. The M‑20iA has built-in vision with an inte­grat­ed vision cable from the J1 base to J3 inter­face pan­el, mak­ing the addi­tion of vision to the robot appli­ca­tion much easier.

The slen­der Fanuc M‑10iA sim­pli­fies appli­ca­tions and floor plans as it is more com­pact than oth­er robots in its class while main­tain­ing the high­est axis speeds and best repeata­bil­i­ty in its class. Fur­ther­more, the M‑10iA can han­dle up to 10kg pay­load and reach a full 1,420mm hor­i­zon­tal­ly. It is tru­ly a small but mighty robot, weigh­ing in at a mere 130 kg while also pro­vid­ing some of the high­est write moments and iner­tia in its class.

Embrace sus­tain­abil­i­ty and dri­ve inno­va­tion with T.I.E. Industrial - North Amer­i­ca’s lead­ing sup­pli­er of refur­bished Fanuc CNC Parts and Robots.