Fanuc M-10iA

The slen­der Fanuc M‑10iA sim­pli­fies appli­ca­tions and floor plans as it is more com­pact than oth­er robots in its class while main­tain­ing the high­est axis speeds and best repeata­bil­i­ty in its class. Fur­ther­more, the M‑10iA can han­dle up to 10kg pay­load and reach a full 1,420mm hor­i­zon­tal­ly. It is tru­ly a small but mighty robot, weigh­ing in at a mere 130 kg while also pro­vid­ing some of the high­est write moments and iner­tia in its class. 

In addi­tion, the Fanuc M‑10iA has a short, stan­dard, and long arm avail­able, and two dif­fer­ent types of wrists, hol­low or high-iner­tia. The hol­low wrist, dress-out and the rout­ing of cables sim­pli­fies the robot, improves the reli­a­bil­i­ty, and reduces the over­all sys­tem cost. Also, the M‑10iA robot can be mount­ed at any angle on the floor, wall, or ceil­ing. The work enve­lope is also increased as J3 can flip over backwards. 

The Fanuc M10iA R30iA makes an excel­lent automa­tion solu­tion for mul­ti­ple appli­ca­tions includ­ing top-speed pick and place, cut­ting, coat­ing, and machine tend­ing. This robot can be attached to the floor, ceil­ing, or at an angle. The Fanuc M‑10iA comes equipped with a 2D vision cable inte­grat­ed through the robot arm and is paired with the R‑30iA con­troller and teach pendant. 

Robots​.com also offers used Fanuc M‑10iA robots; experts work hard to pro­vide like-new robots after they send every used M‑10iA through a rig­or­ous recon­di­tion­ing process.

Whether new or used, the Fanuc M‑10iA is the per­fect solu­tion for your appli­ca­tion as it sets the indus­try stan­dards for small robots with its high axis speeds and incred­i­ble repeata­bil­i­ty for it’s class. The M‑10iA is built with pre­ci­sion and speed in mind as it has increased accel­er­a­tion per­for­mance that results in high­er productivity.