Reducing Downtime with Motor Wheel/STEMCO – Berea, KY

Motor Wheel/​STEMCO has been pro­vid­ing a diverse line of sys­tems and com­po­nents for the com­mer­cial vehi­cle indus­try for many years. The com­pa­ny pro­duces a wide range of prod­ucts, includ­ing wheel end com­po­nents, brake prod­ucts, sus­pen­sion prod­ucts, STEM­CO equip­ment, and tire and mileage solu­tions for com­mer­cial vehi­cles. By adding automa­tion to these process­es, Motor Wheel/​STEMCO will only fur­ther improve their operations.

Recent­ly, Motor Wheel/​STEMCO decid­ed to hire Robots​.com to build a Fanuc R‑2000iA/​165F RJ3iB for their facil­i­ty in Berea, Ken­tucky. This was the facility’s first time pur­chas­ing an indus­tri­al robot, and accord­ing to John Tom­ic, of Motor Wheel/​STEMCO, they were pleased with their purchase.

“As a first time cus­tomer, we were giv­en the best treat­ment when it comes to train­ing and ser­vice,” Tom­ic stat­ed. ​“Robots​.com has met all of our require­ments, and we would use them again.”

The Fanuc sys­tem brought a lot of advan­tages to the com­pa­ny. They were able to improve the orga­ni­za­tion of their pro­duc­tion area, improve safe­ty, and reduce down­time. The com­pa­ny also thought that the cost of the sys­tem was great. ​“It is the best dol­lar val­ue found for this type of prod­uct,” Tom­ic stat­ed. ​“Much bet­ter than new OEM supplier.”

Are you inter­est­ed in learn­ing more about pur­chas­ing a robot from a top inte­gra­tor? Then you should call Robots​.com today online at 877−762−6881!