The FANUC ARC Mate 100 iC is a 6 axis robot designed to provide maximum performance and reliability for welding and cutting applications. The 100iC protects the weld torch cable, gas lines, air lines, and the wire feeder motor cable by routing them inside the robot arm. This improves reliability and reduces setup time, prevents cable interference, and allows offline program generation without compromising the cable integrity.
The 100iC robot creates a large work area and maintains high speeds throughout, conquering up to 10 kg of payload, all the while using a slim wrist enabling entry into small openings in the work space. In addition, this robot arm moves 15% faster than the other robots in its class and can process large parts and use complex tooling without compromising productivity. The FANUC ARC Mate 100iC is compatible with all major brands of welding equipment and can be interfaced with most types of servo-driven or indexing positioners.
A huge advantage of the ARC Mate 100iC is that it is equipped to see, sense, and simulate with the software pair of iRVision system and Collision Guard. Programming is also faster and simpler with a ROBOTGUIDE-WeldPRO simulation software package and Vision Shift that helps compensate for gaps in product spacing during arc or spot welding. Both allow for seamless tooling and fixture changes, ultimately eliminating accidents and saving time normally spent testing or adding adjustments.
There is also a shorter arm version of this robot. The Fanuc ARC Mate 100iC/10s R30iAhas a reduced forearm with a 1,098mm reach and is designed for greater dexterity and less interference with other robots, positioners, and peripherals. It has a 10kg payload and offers cycle times of +/-0.05mm repeatability.
RobotWorx also offers used ARC Mate 100iC robots. Each reconditioned FANUC ARC Mate 100iC goes through a rigorous refurbishment process. All new and refurbished ARCMATE 100iC robots include the RobotWorx Value Package.
|Mounting:||Floor, ceiling, angle, and wall|
|Robot Motion Speed|
|J1||210 °/s (3.67 rad/s)|
|J2||190 °/s (3.32 rad/s)|
|J3||210 °/s (3.67 rad/s)|
|J4||400 °/s (6.98 rad/s)|
|J5||400 °/s (6.98 rad/s)|
|J6||600 °/s (10.47 rad/s)|
|Robot Motion Range|
|J5||+380° - 280°|
|J6||+720° - 540°|
|Submerged Arc Welding|