The highly accurate ABB IRB 2600 increase production through high process speeds and low waste amounts. The patented ABB software, TrueMove, is used for ultimate motion control. The compact design of the IRB 2600 IRC5 cuts cycle times by up to 25%. Maximum acceleration is achieved by the new lower body weight of the arm.

With the same footprint as the IRB 4600 IRC5, significant floorspace can be used by integrating the IRB 2600. The reach of this compact arm can extend underneath the body, creating a large working envelope. This arm is available with a longer reach, higher payload, and a variety of protection packages such as FoundryPlus 2, Foundry Prime 2, and Clean room.

There are also used ABB IRB 2600 robots available through RobotWorx. Each used IRB 2600 goes through a rigorous reconditioning process, bringing it back to mint condition. Additionally, and used ABB IRB 2600 come with the RobotWorx Value Package.

For more information about the ABB IRB 2600, contact a RobotWorx representative today at 740-251-4312.
For more information about the ABB IRB 2600, contact a RobotWorx representative today at 740-251-4312.

Robot Information

Robot Specifications

Axes: 6
Payload: 12.00kg
H-Reach: 1650.00mm
Repeatability: ±0.0600mm
Robot Mass: 280.00kg
Structure: Articulated
Mounting: Floor, Inverted, Angle

Robot Motion Speed

J1 175 °/s (3.05 rad/s)
J2 175 °/s (3.05 rad/s)
J3 175 °/s (3.05 rad/s)
J4 360 °/s (6.28 rad/s)
J5 360 °/s (6.28 rad/s)
J6 500 °/s (8.73 rad/s)

Robot Motion Range

J1 +180° - 180°
J2 +155° - 95°
J3 +75° - 180°
J4 +400° - 400°
J5 +120° - 120°
J6 +400° - 400°
Get our newsletter | Stay on top of the latest news